I will post items here, not always saws, from time to time. If you don't see anything here, there is nothing available. If I do have something here, please contact me with any questions you may have. Thank you.
A bit about my saws:
To begin with, all of my saws are a bit thicker at 15/16th to a full 1" to give a more comfortable and rounded grip. The thicker wood is more costly to me but worth it. I recognize that different people prefer different hang angles, as well. Vintage dovetail saws were made in a multitude of hang angles. For this reason I make my dovetail saws in three different hang angles. A 32* least aggressive hang, a 38* mid range hang, and lastely a 45* hang for those who require a more aggressive hang angle. Each saw is hand rasped and shaped one at a time. The solid precision slotted brass backs are compression fit and tapped on to the plate to a uniform depth. No glue is needed. Each saw plate may be rounded or square, your choice, with every saw tooth hand filed by me personally and tested. I test each saw to make sure it cuts a straight line out of the box. The dovetail saw teeth have a total set of approx. 0.006" to give a kerf of approx. 0.026 to 0.027. A 0.015" plate has a total kerf of approx. 0.021". If you desire a square plate or a plate with a different ppi, I will punch and sharpen to your preference. If you are not happy with my saws, you simply need to return them for a full refund. Thank you for your consideration.